KOREFIB® FiberMesh 3 mm Composite reinforcing mesh for concrete 3×100×100
Composite reinforcing mesh roll 3×100×100
A composite reinforcing mesh roll for fast placement in concrete floors, screeds and non-load-bearing construction layers. Suitable as a lightweight replacement for welded steel mesh where easy handling, corrosion resistance and long service life are decisive.
Enter the welded steel mesh from your design or the layer thickness - the tool will recommend a matching KOREFIB® FiberMesh.
Which FiberMesh replaces my steel mesh? Select the steel mesh from your design or the layer thickness - the tool will recommend a matching composite mesh. Open toolHide
Indicative aid - does not replace design documentation. The tensile strength is the average of the longitudinal and transverse directions (FiberMesh per ETA 25/0367, steel converted from a 500 MPa yield strength). The recommendation by layer thickness is the manufacturer's experience-based choice, not a structural calculation. It applies to the anti-shrinkage function in non-loaded screeds and floor screeds up to 150 mm, not to load-bearing reinforcement. The specific use must be approved by a designer or structural engineer. Detailed guide ›
_en.png?6a7597dd)
_en.png?6a759798)
_en.png?6a75986b)
KOREFIB® FiberMesh 3 mm
A composite anti-shrinkage reinforcing mesh with a 100×100 mm mesh spacing and a 3 mm bar diameter. A universal variant for cement and anhydrite screeds, floor layers and structural toppings, where the reinforcement is meant to limit shrinkage cracks and distribute tensile stress across the area — corrosion-free and at a low weight.
The 3×100×100 variant is supplied with CE marking and ETA documentation (ETA 25/0367). It serves as anti-shrinkage and distribution reinforcement in non-loaded layers, not as load-bearing reinforcement.
The 3×100×100 variant is the most universal choice for screeds and floor layers in residential and commercial areas. It offers a balanced tensile strength, low weight and a favorable price, and is suitable for most common anti-shrinkage applications.
Technical parameters
| Parameter | KOREFIB® FiberMesh 3 mm |
|---|---|
| Size | 3×100×100 mm CE |
| Bar diameter | 3 mm |
| Mesh spacing | 100 × 100 mm |
| Tensile force per bar / strand [N]* | 9,088 / 10,966 |
| Tensile strength [MPa]* | 1,140 |
| Tensile strength average of both directions [kN/m] | 101 |
| Modulus of elasticity [GPa]* | 43 |
| Elongation [%]* | 4.9 |
| Weight [g/m²] | 283 |
| Alkali resistance [%] | 96 |
* Values are based on TZÚS test reports (ETA 25/0367). The values given are indicative for anti-shrinkage and distribution applications in non-loaded layers. They are not design values, nor an automatic replacement for load-bearing reinforcement.
Available sizes
Difference between variants
50×50 mm mesh spacing. A denser grid for thinner screeds and light layers, where finer crack distribution is needed.
100×100 mm mesh spacing. A universal choice for screeds and floor layers in residential and commercial areas.
100×100 mm mesh spacing. A thicker bar for thicker screeds and structural toppings with a greater layer thickness.
All variants serve as anti-shrinkage and distribution reinforcement. Not sure which to choose? Send us the layer build-up and the intended use, and we will recommend a suitable variant.
Typical applications
Advantages of the 3 mm variant
- ETA-certified variant with European documentation
- Supplied in rolls 1 and 2 m wide for easy handling
- Low weight of 283 g/m² and simple placement
- 100×100 mm mesh spacing suitable for common screed layers
- Does not corrode even in damp and alkaline environments
- No heavy machinery, cutting without sparks
Product rating
Be the first who will post an article to this item!
